NAIL CORRECTION + MODELLING

Length approx. 14,5 cm. With 7 steps. For bending the middle hanger (Omega) of the Ross-Fraser-Brace

Length 11 cm, pointed Special design for adjusting the loop and bending it into the so-called submissive position. The wire thicknesses over 0,4 mm need to be prepared in the cone of the pliers.

These round adjustable pliers were developed by RUCK. They easily and accurately adjust the end hooks of the GOLDSTADT professional as well as other makes of brace, such as Ross Fraser. 2 different round elements (1.0 mm and 1.5 mm radius) to bend the end loop. The third round element (4.0 mm radius) gives the brace the necessary pre-tension / curvature. The flat element is used for some of the flat nose pliers work (e.g. bending the bracket of an end loop). It therefore covers a unique range of bending jobs required in nail correction. Made of the best quality stainless steel.

Length 14 cm, short / smooth For adjusting the brace to the body of the nail and for bending the end-loops. Suitable for all wire thicknesses.

14 cm long Many applications, specially for the removal of nail corners that have been cut off

Length 10 cm, straight Specially for cutting GOLDSTADT professional braces. Straight cut with slight scalloping. Accurate cutting with the minimum of effort.

Wire cutters with special carbide tipped blades for shortening and adjusting all correction braces made of wire and metal, e.g. VHO-Osthold, Ross-Fraser, etc. Very dainty, making them suitable for use by petite and narrow hands. The special construction means they need very little effort and give an exact cut. No sharpening necessary. With reset spring.

0.1 mm thick The GOLDSTADT professional adhesive brace, stainless steel, fully gold-plated. In the 5 sizes 12, 15, 17, 20 and 23, material thickness 0.1 mm, 10 pieces each.

The adhesive clip has its strengths with very thin nail plates and highly sensitive or inflamed nail fold, as it is not hooked under the nail edge. For application, the adhesive clip remains 2-4 mm flatter than the nail curvature and thus receives its gentle but sustainable bending force. Thanks to the gold coating, the bonding is very well supported. Compared to plastic clips dominated by the extremely flat design and not least the attractive appearance. Sterilisable. 10 pieces

The 'golden age' for professional nail correction. The GOLDSTADT professional Classic for individually cutting to size. Stainless steel, gold-plated for optimum adhesion and anti-allergenic properties, 4 strips each 100 mm long, 3 mm wide and just 0.1 mm thick have everything they need for effective application. 4 pcs, 100 mm long

The GOLDSTADT professional full and half braces in a trial set, stainless steel, fully gold-plated. Full brace in sizes of 17 and 20 with thickness of 0,1 and 0,15 mm. Half brace in sizes of 15 and 17, 0.1 mm thick, and size 20 with 0.15 mm material thickness. 10 pieces each.

The GOLDSTADT professional full brace with 2 ends, stainless steel, fully gold-plated. In the 5 sizes 12, 15, 17, 20 and 23, material thickness 0.1 mm, 10 pieces each.

The GOLDSTADT professional full brace with 2 ends, stainless steel, fully gold-plated. In the 5 sizes 12, 15, 17, 20 and 23, material thickness 0.15 mm, 10 pieces each. 0.15 mm thick

The GOLDSTADT professional half brace with 1 end, stainless steel, fully gold-plated. In the 5 sizes 12, 15, 17, 20 and 23, material thickness 0.1 mm, 10 pieces each 0.1 mm thick

0.15 mm thick The GOLDSTADT professional half brace with 1 end, stainless steel, fully gold-plated. In the 5 sizes 12, 15, 17, 20 and 23, material thickness 0.15 mm, 10 pieces each.

The brace can be used if only one-sided complaints to the nail or if a part of the nail plate is missing. Another argument for the use is strong pressure from the neighbouring toe, which could lead to friction pain. In general, the bending force is limited compared to the full clasp, since the exposed leg is glued only flat. The brace is very gentle and can be used very well on thin or baby nails. Sterilisable.

The brace can be used if only one-sided complaints to the nail or if a part of the nail plate is missing. Another argument for the use is strong pressure from the neighbouring toe, which could lead to friction pain. In general, the bending force is limited compared to the full clasp, since the exposed leg is glued only flat. The brace is very gentle and can be used very well on thin or baby nails. Sterilisable.

The complete ORTOGRIP professional brace set in all 6 sizes, 1 of each size, plus 10 loops of 0.25, 0.30, and 0.40 mm. All braces with asymmetrical plastic grip for the perfect hold (longer side for thumb) with colour coding: Blue = size 1, very small roof, wire thickness 0.3 mm Green = size 2, small roof, wire thickness 0.35 mm Magenta = size 3, normal roof, wire thickness 0.35 mm Orange = size 4, normal roof, wire thickness 0.4 mm Yellow = size 5, larger roof, wire thickness 0.4 mm White = size 6, larger roof, wire thickness 0.5 mm

Stay in the loop! With the ORTOGRIP professional instrument set you have exactly the right tools for professional nail correction. There is the new curved hook spatula – one end twists the loop while the spatula is used to apply the covering of 2-component plastic. The silicone mixing vessel is provided for mixing. The double-ended nail lifter is used for examination of the nail fold and for inserting tamponades, the needle-nose pliers for bending, and the wire cutters with carbide-tipped blades for cleanly cutting the wire ends.

The ORTOGRIP professional starter set is an excellent starting point for the modern, professional treatment of many nail problems. The starter set contains the 6-part basic brace assortment and 5 loops with wire thicknesses of 0.25, 0.30 and 0.40 mm, allowing the brace to be adjusted multiple times. It also includes the RUCK® NAIL CORRECTION adhesive, activator and 2-component plastic for nail prostheses. The plastic offers excellent coverage and sealing of the wire ends of the loop, including complete coverage or partial replacement of the nail plate. These tried-and-tested RUCK® INSTRUMENTS are included: Round step plier, wire cutters with carbide-tipped blades, needle-nose pliers with short jaws, double-ended nail lifter, curved hook spatula and narrow nail file. For plastic there is the RUCK® silicone mixing vessel and of course a training DVD and detailed brochure. Tablets not included.